Database_installer

Atsijungęs

Pranešimai: 0

https://imgur.com/a/CsoiARh

Kame gali būti problema, kad daėjus iki paskutinio pasirinkimo, paspaudus Y arba N, išmeta lauk iš cmd?

Paskutinį kartą redagavo: Konccu 11 Sausio 2020 - 18:51

11 Sausio 2020 - 18:51 / #1

Atsijungęs

povis111

Pranešimai: 0

gal klaida gauni ir išsijungia langas jos net nepamačius. reiktų skripto faile pause dasirašyt po vykdomos komandos cj.
siaip duomenu bazes duomenis gali isirasyt ir ne per installeri o tiesiog sql failiukus suleisdamas

Paskutinį kartą redagavo: povis111 12 Sausio 2020 - 00:36

12 Sausio 2020 - 00:34 / #2

Atsijungęs

Konccu

Pranešimai: 0

povis111

gal klaida gauni ir išsijungia langas jos net nepamačius. reiktų skripto faile pause dasirašyt po vykdomos komandos cj.
siaip duomenu bazes duomenis gali isirasyt ir ne per installeri o tiesiog sql failiukus suleisdamas

bet jei keliu rankiniu būdu, dviejuose sql gaunu error:

1 - npc.sql

2 - spawnlist.sql

12 Sausio 2020 - 11:51 / #3

Atsijungęs

povis111

Pranešimai: 0

čia dar nesukurus pačio table gauni? ar į jau sukurta table duomenis deda? nesutampa field'ai. gali ant table dešini paspaudęs pažėt 'design' ar koks ten mygelis. o šiaip sql'us gali čia numest irgi galiu pažėt kas ten nesueina

14 Sausio 2020 - 18:04 / #4

Atsijungęs

Konccu

Pranešimai: 0

povis111,
nieko nekūriau, tiesiog po vieną dėjau visus į navicat. Visi susidėjo normaliai, ir 2 nenori įsidėti. Tarp navicat juos rodo, bet jie tušti.

1 - Npc.sql: https://www.mediafire.com/file/nwzmp79rshpmcgz/npc.sql/file
2 - Spawnlist.sql: https://www.mediafire.com/file/wjt7oz1zby3xo7y/spawnlist.sql/file

15 Sausio 2020 - 04:41 / #5

Atsijungęs

povis111

Pranešimai: 0

pas save pabandžiau sudėt juos ir susidėjo, neturiu ką pasiūlyt...
išdumpinau juos pas save, gal šitokius suvalgys :D
https://www.mediafire.com/file/8mh504phabxkw1q/npc0.sql/file
https://www.mediafire.com/file/j8i60lngdyp489x/spawnlist0.sql/file

Paskutinį kartą redagavo: povis111 16 Sausio 2020 - 11:30

16 Sausio 2020 - 11:24 / #6

Atsijungęs

Konccu

Pranešimai: 0

povis111,
juokas juokais, bet su tavo pasharintais jokiu problemu. :D

16 Sausio 2020 - 21:19 / #7

Atsijungęs

Konccu

Pranešimai: 0

povis111,
O ką dėl šito erroro pasakytum? Java 8 kaip ir aCis reikalauja, viska. Prieš wind perrašymą tas pats packas pasileido be problemų, o dabar gaunu tokį:

Exception in thread "main" java.lang.NoSuchMethodError: java.nio.ByteBuffer.clear()Ljava/nio/ByteBuffer;
        at net.sf.l2j.gameserver.geoengine.geodata.BlockMultilayer.<init>(BlockMultilayer.java:89)
        at net.sf.l2j.gameserver.geoengine.GeoEngine.loadGeoBlocks(GeoEngine.java:279)
        at net.sf.l2j.gameserver.geoengine.GeoEngine.<init>(GeoEngine.java:92)
        at net.sf.l2j.gameserver.geoengine.GeoEngine$SingletonHolder.<clinit>(GeoEngine.java:1521)
        at net.sf.l2j.gameserver.geoengine.GeoEngine.getInstance(GeoEngine.java:1516)
        at net.sf.l2j.gameserver.GameServer.<init>(GameServer.java:215)
        at net.sf.l2j.gameserver.GameServer.main(GameServer.java:127)

ačiū už atsakymus. ;)

16 Sausio 2020 - 23:24 / #8

Atsijungęs

povis111

Pranešimai: 0

čia bando geodata užkraut, bet neranda failo greičiausiai, pabandyk išsijungt geodata per nustatymus.

17 Sausio 2020 - 09:46 / #9

Atsijungęs

Konccu

Pranešimai: 0

povis111,
kad ant acis nematau išjūngimo funkcijos geodatos.

# =================================================================
#                             Geodata
# =================================================================

# 1) GeoData are now !MANDATORY! to start a server due to following reasons:
#     * Future usage for doors and admin fences
#     * Future usage for new npc spawn manager
# 2) Because of real-time performance aCis is using geodata files only in
#    diagonal L2D format now (using filename e.g. 22_16.l2d).
#    Standard geodata formats L2J (22_16.l2j) or L2OFF (22_16_conv.dat) are no
#    longer supported.
# 3) L2D geodata can be obtained by conversion of existing L2J or L2OFF geodata.
#    Launch "GeoDataConverter.bat/sh" and follow instructions to start the conversion.

# Specifies the path to geodata files. For example, when using geodata files located
# at different folder/harddrive ("C:/Program Files/Lineage II/system/geodata/"), default: ./data/geodata/
GeoDataPath = ./data/geodata/

# Player coordinates synchronization, default: 2
#   1 - partial synchronization Client --> Server ; don't use it with geodata
#   2 - partial synchronization Server --> Client ; use this setting with geodata
#  -1 - Old system: will synchronize Z only
CoordSynchronize = 2

# =================================================================
#                           Path checking
# =================================================================

# Line of sight start at X percent of the character height, default: 75
PartOfCharacterHeight = 75

# Maximum height of an obstacle, which can exceed the line of sight, default: 32
MaxObstacleHeight = 32

# =================================================================
#                           Path finding
# =================================================================

# Pathfinding array buffers configuration, default: 100x6;128x6;192x6;256x4;320x4;384x4;500x2
PathFindBuffers = 100x6;128x6;192x6;256x4;320x4;384x4;500x2

# Base path weight, when moving from one node to another on axis direction, default: 10
BaseWeight = 10

# Path weight, when moving from one node to another on diagonal direction, default: BaseWeight * sqrt(2) = 14
DiagonalWeight = 14

# When movement flags of target node is blocked to any direction, multiply movement weight by this multiplier.
# This causes pathfinding algorithm to avoid path construction exactly near an obstacle, default: 10
ObstacleMultiplier = 10

# Weight of the heuristic algorithm, which is giving estimated cost from node to target, default: 20
# For proper function must be higher than BaseWeight and/or DiagonalWeight.
HeuristicWeight = 20

# Maximum number of generated nodes per one path-finding process, default 3500
MaxIterations = 3500

# Path debug function, FOR DEBUG PURPOSES ONLY!
# Adena = Nodes known to path-find algorithm (amount show node cost * 10) 
# Antidote = constructed path (amount show node cost * 10)
# Blue Potion = begining of the path
# Green Potion = node removed by LOS post-filter
# Red Potion = actual waypoints 
DebugPath = False

# Write invalid nodes into geo_bugs.txt, FOR DEBUG PURPOSES ONLY!
DebugGeoNode = False

# =================================================================
#                          Geodata files
# =================================================================

# The world contains 176 regions (11 x 16), each region has own geodata file.
# Geodata files are loaded according to the list below.
#   16_10:	load region (geodata options are enabled)
#			Server will not start, until all enabled regions are loaded properly.
#   #16_10:	skip region (geodata options are disabled)
#			Disabled regions will be considered as in "everything-allowed" mode.
#			Monster aggression/attacks/spellcast/movement will pass though walls and other obstacles, no pathfinding will be used.
# Some regions are not supported by L2 client.
16_10
16_11
16_12
#16_13 - not supported by L2 client
#16_14 - not supported by L2 client
#16_15 - not supported by L2 client
#16_16 - not supported by L2 client
#16_17 - not supported by L2 client
#16_18 - not supported by L2 client
16_19
16_20
16_21
16_22
16_23
16_24
16_25
17_10
17_11
17_12
#17_13 - not supported by L2 client
#17_14 - not supported by L2 client
#17_15 - not supported by L2 client
#17_16 - not supported by L2 client
#17_17 - not supported by L2 client
17_18
17_19
17_20
17_21
17_22
17_23
17_24
17_25
18_10
18_11
18_12
18_13
18_14
#18_15 - not supported by L2 client
#18_16 - not supported by L2 client
18_17
18_18
18_19
18_20
18_21
18_22
18_23
18_24
18_25
19_10
19_11
#19_12 - not supported by L2 client
19_13
19_14
19_15
19_16
19_17
19_18
19_19
19_20
19_21
19_22
19_23
19_24
19_25
20_10
20_11
#20_12 - not supported by L2 client
20_13
20_14
20_15
20_16
20_17
20_18
20_19
20_20
20_21
20_22
20_23
20_24
20_25
#21_10 - not supported by L2 client
#21_11 - not supported by L2 client
#21_12 - not supported by L2 client
21_13
21_14
21_15
21_16
21_17
21_18
21_19
21_20
21_21
21_22
21_23
21_24
21_25
#22_10 - not supported by L2 client
#22_11 - not supported by L2 client
#22_12 - not supported by L2 client
22_13
22_14
22_15
22_16
22_17
22_18
22_19
22_20
22_21
22_22
22_23
22_24
22_25
23_10
23_11
23_12
23_13
23_14
23_15
23_16
23_17
23_18
23_19
23_20
23_21
23_22
23_23
23_24
23_25
24_10
24_11
24_12
24_13
24_14
24_15
24_16
24_17
24_18
24_19
24_20
24_21
24_22
24_23
24_24
24_25
25_10
25_11
25_12
#25_13 - not supported by L2 client
25_14
25_15
25_16
25_17
25_18
25_19
25_20
25_21
#25_22 - not supported by L2 client
#25_23 - not supported by L2 client
#25_24 - not supported by L2 client
#25_25 - not supported by L2 client
#26_10 - not supported by L2 client
26_11
26_12
#26_13 - not supported by L2 client
26_14
26_15
26_16
#26_17 - not supported by L2 client
#26_18 - not supported by L2 client
#26_19 - not supported by L2 client
#26_20 - not supported by L2 client
#26_21 - not supported by L2 client
#26_22 - not supported by L2 client
#26_23 - not supported by L2 client
#26_24 - not supported by L2 client
#26_25 - not supported by L2 client

+ seniau naudodavau tą pačią geodatą, ir viskas ok būdavo.

Paskutinį kartą redagavo: Konccu 17 Sausio 2020 - 12:30

17 Sausio 2020 - 12:30 / #10